为 shell 脚本增加执行顺序

1 files changed, 0 insertions, 146 deletions

diff --git a/scripts/system.sh b/scripts/system.sh
deleted file mode 100644
index fdd7e16..0000000
--- a/scripts/system.sh
+++ /dev/null
@@ -1,146 +0,0 @@
-#/bin/bash
-
-# 脏标记：0=不需要重建 UKI，1=需要
-MKINITCPIO=0
-
-SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-ETC_DIR="$(cd $SCRIPT_DIR && cd ../etc && pwd)"
-echo $ETC_DIR
-
-setup_vconsole_font() {
-  sudo sed -i 's/^\(FONT=.*\)$/# \1\nFONT=ter-132n/' /etc/vconsole.conf
-  
-  sudo cp /etc/kernel/cmdline /etc/kernel/cmdline.bak
-  sudo sed -i 's/$/ fbcon=font:TER16x32/' /etc/kernel/cmdline
-
-  sudo cp /boot/loader/loader.conf /boot/loader/loader.conf.bak
-  sudo sed -i -e '/^[[:space:]]*#\?[[:space:]]*console-mode/d' /boot/loader/loader.conf
-  echo 'console-mode 1' | sudo tee -a /boot/loader/loader.conf >/dev/null
-
-  # 标记需要重建
-  MKINITCPIO=1
-}
-
-setup_shadowsocks() {
-  sudo cat > /etc/shadowsocks-rust/s.json <<EOF
-{
-  "server": "x.xxx",
-  "server_port": 1111,
-  "password": "xxxxxxxxxxxxxxxx",
-  "timeout": 300,
-  "method": "aes-256-gcm",
-  "locals": [
-    {
-      "local_address": "127.0.0.1",
-      "local_port": 1080
-    },
-    {
-      "local_address": "127.0.0.1",
-      "local_port": 3128,
-      "protocol": "http"
-    }
-  ]
-}
-EOF
-
-  sudo systemctl enable --now shadowsocks-rust@s
-}
-
-setup_dae() {
-  sudo cat > /etc/dae/config.dae <<EOF
-global {
-    wan_interface: auto
-    auto_config_kernel_parameter: true
-    log_level: info
-
-    # Keep the original domain when dialing through the proxy. This also makes
-    # domain-based routing independent from the IP returned by the local DNS.
-    dial_mode: domain
-    allow_insecure: false
-}
-
-# Reuse the local Shadowsocks SOCKS5 listener instead of duplicating the
-# remote server address and password in this configuration.
-node {
-    # local_ss: 'socks5://127.0.0.1:8888'
-
-    # Direct Shadowsocks node example using the SIP002 URI format. Replace the
-    # cipher, password, host, and port, then uncomment it. Base64 is encoding,
-    # not encryption, so keep the real link under secret/.
-    # example_ss: 'ss://YWVzLTEyOC1nY206dGVzdA@example.com:8388#example-ss'
-    ss: 'ss://aes-256-gcm:xxxxxxxxxx@xxxx:1234'
-}
-
-group {
-    proxy {
-        filter: name(ss)
-        policy: fixed(0)
-    }
-}
-
-# Let dae observe DNS queries so that routing rules can match domain names.
-dns {
-    upstream {
-        router: 'udp://192.168.8.1:53'
-        direct_dns: 'tcp+udp://223.5.5.5:53'
-    }
-
-    routing {
-        request {
-            qname(suffix: l) -> router
-            qname(suffix: lan) -> router
-            fallback: direct_dns
-        }
-
-        response {
-            fallback: accept
-        }
-    }
-}
-
-routing {
-    # Shadowsocks must reach its remote server directly to avoid a proxy loop.
-    pname(sslocal) -> direct
-
-    # Keep local, multicast, and other private destinations direct.
-    dip(224.0.0.0/3, 'ff00::/8') -> direct
-    dip(geoip:private) -> direct
-
-    # Route mainland China IPs directly. Everything else uses the proxy, so
-    # overseas destinations do not need to be maintained in a domain list.
-    dip(geoip:cn) -> direct
-
-    fallback: proxy
-}
-EOF
-}
-
-setup_modem() {
-  sudo systemctl enable --now ModemManager.service
-}
-
-setup_fprint() {
-  # --- system-local-login（KDE 锁屏/系统登录）---
-  sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/system-local-login
-  sudo sed -i '/^auth[[:space:]]\+include[[:space:]]\+system-login/i auth      sufficient pam_fprintd.so' /etc/pam.d/system-local-login
-
-  # --- polkit-1 ---
-  [ -f /etc/pam.d/polkit-1 ] || sudo cp /usr/lib/pam.d/polkit-1 /etc/pam.d/polkit-1
-  sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/polkit-1
-  sudo sed -i '/^auth[[:space:]]\+include[[:space:]]\+system-auth/i auth       sufficient   pam_fprintd.so' /etc/pam.d/polkit-1
-
-  # --- kde-fingerprint ---
-  [ -f /etc/pam.d/kde-fingerprint ] || sudo cp /usr/lib/pam.d/kde-fingerprint /etc/pam.d/kde-fingerprint
-}
-
-setup_vconsole_font
-setup_shadowsocks
-setup_dae
-setup_modem
-setup_fprint
-
-# 统一重建一次
-if [ "$MKINITCPIO" -eq 1 ]; then
-  echo ">>> mkinitcpio -P"
-  sudo mkinitcpio -P
-fi
\ No newline at end of file